Full information about the Road Works sign

Is the person who did not remove the signs after repairs violate?

Now let’s figure out why the actions of the state and the organization that carried out the repair work, which led to the presence of a temporary sign on the road, violate the law?
According to the Law “On Road Traffic Safety,” traffic management activities pursue two goals:

1. Improving road safety.
2. Increasing road capacity.

As we have already figured out, a sign forgotten on the road that limits speed, prohibits overtaking, stopping or anything else does not affect road safety in any way. And the road capacity has been reduced.

And in this sense, an unremoved temporary sign after the completion of road repairs in 2021 has a very rotten smell called “negligence” for both TsAFAP inspectors and traffic police inspectors.

Erased road sign

How should repair areas be designated? What are the requirements?

Article 12 of the Road Safety Law states that road repairs and maintenance must be safe for road users. At the same time, road workers are required to comply with the requirements of technical regulations.

Types of fencing

To attract the attention of drivers and mark repair sites, road services can use: road signs, markings, fencing blocks and shields, reflective barriers, and barrier tapes. If the repair is small, then temporary warning signs, protective tape and cords are most often used. During serious work (when repairs may take more than a day), road workers, in addition to signs and markings, use fencing blocks and shields.

How many road groups are there in the traffic rules?

Road signs and their designations
Road signs are divided into 8 groups. Each group pursues its own goals - to warn the driver about danger, indicate some kind of prohibition, indicate the correct direction of movement, etc.

Important!

As a rule, the types of signs have their own distinctive shape and are also painted in a certain color. And just by these parameters, the driver can guess what the sign means - a prohibition (white circle with a red rim) or a warning (triangle with a red rim). The most important signs are specially shaped so that they can be distinguished even from behind - “Main Road”, “Give Way” and “No Stopping”.

We have collected general information on the groups and designations of road signs according to traffic rules in 2021 in the table:

Sign requirements for vehicle drivers

Mandatory road signs 4.1.1

The recommendations that should be followed while driving along the area indicated by the “Road Repair” sign are very simple:

1. See what speed you need to maintain, and immediately do everything necessary to quickly achieve the desired value.
2. If a sign on a white background and a sign on a yellow background are mutually exclusive in meaning, follow the instructions of the latter.
3. Be prepared to give way in areas where the roadway narrows to one lane.
4. Do not argue with a repair crew worker when he is directing traffic - he has such a right.
5. The sign “Detour on the right (left)” indicates exactly the direction that you need to follow - you cannot move in the opposite direction, even if it seems convenient and safe to you.
6. When the gravel sign is posted, it's best to roll up your windows to prevent flying rocks from injuring you.
7. After the dangerous section is left behind, you will see a sign allowing you to drive at the speed established by normal traffic rules, without the restrictions in force on the road being repaired. Until this indicator appears, you cannot increase your speed, even if you do not see equipment, people or obstacles. The same applies to the sign prohibiting overtaking.
8. Under no circumstances should sign posts be moved to clear the way for you.

Exceptions

Drivers should not forget that the presence of the 1.25 sign on this section of the road makes it a priority over other signs. Its combination with other signs indicates the traffic pattern for vehicles on the road under repair.

Temporary signs not removed

The road repairs have been completed, but temporary prohibitory signs remain in place. The camera programmed to temporarily limit the speed also remained in place. The driver receives a decision and tries to challenge it. In response he receives: “There is a sign - observe.” An attempt to refer to GOST standards makes law enforcement officers and judges smile: “Standards are a voluntary matter.” Let's try to understand our question of whether and how to appeal a fine if temporary signs were simply forgotten or deliberately not removed after the road repairs were completed.

Meaning of the Road Works sign

What is more important: a sign or a marking? temporary signs

In the world of motorists, road signs play a big role. All people, after receiving their licenses, are required to know them by heart. Properly placed signs protect motorists from accidents on the roadway. When repairing the road, warning signs are installed. In the traffic rules, such designations are written with code 1.25. When a driver sees a “Road Works” warning sign, he knows in advance that repair work is being carried out somewhere nearby. In such a site, specialized equipment, many workers and fences are often found. The sign is triangular in shape, outlined in red around the edges and inside of which is a black man with a shovel. This sign is placed if:

1. The curb is being cleaned and repaired

2. Traffic light adjustment and repair

3. Removing trees and bushes along the road

4. Asphalt laying and repairs

5. Marking lines for the road

You can't just put up a sign. Workers must develop an individual scheme and choose a place to install the sign. If you do not follow such schemes, then an emergency situation may arise during road repairs, which is strictly prohibited. It happens that work is carried out without special signs, and the traffic police inspector has the opportunity to fine the workers. A motorist, when he sees such a sign, should slow down his vehicle and watch what is happening on the road. All drivers should be aware that road workers have the ability to regulate traffic at repair sites and have the authority to block the passage for vehicles. In such a situation, they are obliged to show the person a detour route where repair work is not being carried out. This sign is temporary and cannot be permanently installed due to its temporary location. Remember that this sign has significant superiority over other signs that are located on this piece of road. When cyclists and pedestrians use the roadway, a sign is placed, and only then can repair work be carried out on sidewalks or bicycle paths. When short-term work is carried out, such a sign is placed within 10-15 m from the repair area. Signs about repair work immediately indicate what is happening on the road. To cross a closed area, the driver is shown auxiliary signs. Near residential premises, the “Road Works” sign is installed within 150-300 meters from the repair site, and is repeated again in front of the site. In populated areas, the sign is installed at a distance of 50 meters from the area where repairs are being made. The sign is also placed in front of the site.

Sometimes you can find a combination of 1.25 with other signs, such as:

1. Speed ​​limit sign or 3.24. This sign is intended to regulate the movement of vehicles at the speed indicated on the sign. He is depicted on a yellow background

2. Sign 1.18 indicates that during the repair of the road lane there is every chance that crushed stone or stone will fall onto the roadway. The designation must also be on a yellow background

3. Signs 1.20.1, 1.20.3, 1.20.2 indicate a narrowing of the road. Due to regular repair work, such signs on a yellow background warn about this.

What is recommended while driving

1. When you see the “Road Works” sign, you must reduce your speed.

2. Perform movements only with auxiliary signs

3. Never overtake

4. Follow only the direction indicated for moving the area with repair work

Never forget that if you find yourself in such situations, you must always follow the traffic rules and follow the signs and recommendations. If you follow the traffic rules, you and your family will be safe.

Sign on traffic rules tickets

What are these signs warning you about?

More details

What are these signs warning you about?

More details

Warning signs are those categories of road signs whose task is to warn road users that they have reached a dangerous section of the road, while driving through which certain measures must be taken that will be appropriate to the situation. Warning signs are some kind of illustration of the main reason that makes a section of the road unsafe, for example, when approaching a railway crossing without a barrier, you will see a traffic warning sign with a picture of a locomotive on it. Some warning signs may notify the driver that he should slow down, some will call for attention, and some will even force him to stop.

Depending on the level of danger, warning Sign 1.25 - Road Works is placed at different distances from the immediate dangerous section of the road. Certain signs are installed much earlier so that the driver has time to prepare for a certain maneuver or action. Also, the distance at which warning signs are installed depends on whether they are located in a populated area or not. So, outside populated areas, signs can be located 150-300 meters from the dangerous area, and in populated areas 50-100 meters away.

Warning signs are one of the most important categories of road signs, as they are a warning of a real-life danger. Failure to observe and heed warning signs can lead to dire consequences, including death, so you should be aware of them and always pay attention to them on the road.

Installation of equipment

The rules for arranging permanent and temporary signs are regulated by GOST of the Russian Federation (GOST R 52289-2004).

In accordance with the rules, the function of road signs is to prevent accidents and inform drivers of vehicles about changes in traffic conditions on a particular section of the road. Accordingly, GOST of the Russian Federation indicates that the overview of indicators of vehicle movement features cannot and should not overlap:

• installation of temporary or permanent structures;
• green spaces;
• supports for lighting the area;
• billboards, billboards, etc.

Correct installation must take into account the use and maintenance of road equipment and minimize the possibility of damage to signs.

GOST also indicates that the installation of various signs in one place is regulated by a certain order of groups:

1. Priority.
2. Warning.
3. Binding.
4. Indicators of special regulations.
5. Prohibiting.
6. Informing.
7. Service.

Installation is carried out in order, from top to bottom, from left to right at the required distance from each other.

Basic rules for installing road devices:

• compliance with GOST standards;
• standard distance for character recognition (at least 100m);
• installation location: right side of the highway;

In multi-lane traffic, duplication of warnings is practiced in the center of the roadway.

Why and where is it installed?

The road sign “Caution, children” means that in those areas where it is placed, a special traffic regime is expected

Draw the driver's attention to the fact that there may be children nearby who tend to cross the road in places that are not always intended;

warn that in the current area of ​​the roadway, in a place equipped or not equipped for crossing, children and adolescents can cross the road;

notify drivers that the vehicle on which the sign is located is used for transporting children.

Based on the purpose of sign 1.23, it can be placed:

In areas located in close proximity to educational, healthcare and sports institutions;

in places where large numbers of children systematically gather;

near camps and boarding houses for recreation;

in areas where young pedestrians most often cross the road;

on vehicles (primarily buses) intended for the mass transportation of children in the amount of 2 people or more.

Additionally, next to the “Children” road sign, plate No. 8.2.1 is placed, which determines how long the safe segment will be. The sign installed on the vehicle will also be framed by a red line. Inside the sign should be a picture of two running children on a yellow-orange background.

Spring and summer are ahead, when there are significantly more pedestrians on the streets. Warm days especially attract children to the streets, who, compared to adults, often do not pay attention to road signs and markings. They can cross the road at any place convenient for them and suddenly run out onto the roadway. Therefore, drivers should be especially careful while driving when children appear along the roads, despite the absence of a special road sign.

Cattle drive

The livestock driving road sign is installed on sections of the road near which livestock farms are located, as well as in those places where livestock is often driven across the roadway:

This sign is typical for rural areas, but in cities it is extremely rare to find it.

If there is such a sign, it makes sense to slow down and be extremely careful, because pets can appear in the most unexpected places.

For example, I happened to see how several cows from the herd lay down to rest right on the roadway just around the bend.

Road repair

Another example of the work of hacks. If you fly into such a fence and damage your car, you will have to sue the road workers. But the chances of receiving compensation are high. The fact is that technical standards prohibit the use of road signs whose images are damaged and can be interpreted ambiguously. Another example of the work of hacks. If you fly into such a fence and damage your car, you will have to sue the road workers. But the chances of receiving compensation are high. The fact is that technical standards prohibit the use of road signs whose images are damaged and can be interpreted ambiguously.

Arrangement of temporary signs

The use and installation of temporary signs on roads are regulated by the rules of GOST of the Russian Federation and relate to:

1. Sizes of temporary signs (not less than standard sizes).
2. Colors and states of symbols.
3. Installation of additional components (LEDs).
4. Rules for dismantling upon completion of road work.
5. Dimensions of portable supports and their relationship with the dimensions of the designations.
6. Distances between signs and location.

According to the rules, temporary road signs are installed:

• on sections of routes with poorly visible markings (poor quality markings, mud, snow);
• during repair work;
• due to the seasonal specifics of a particular region.

Temporary signs installed for the above reasons are dismantled after the problems are resolved. If further use of signs is planned, current traffic regulations recommend covering the supports with thick covers.

In what cases is a warning about repair work on the road issued?

As a rule, the need to install a “Road Works” sign is discussed in the event of certain situations that may interfere with safe movement, or even make it impossible.

Thus, the said sign is placed if it is necessary to reconstruct an existing road surface or lay a new one. The described sign is also installed when clearing dirt from curbs along the road or when it becomes necessary to replace light bulbs in traffic lights and street lamps.

Such a sign is also necessary during sanitary pruning of trees growing along the route.

Bumper

Such blocks are much more convenient and safer than concrete ones. For proper use, they need to be filled with water (in summer) or a special solution (in winter). In practice, as a rule, road workers do not bother themselves with this. You often see blocks scattered all over the road by the wind. Such blocks are much more convenient and safer than concrete ones. For proper use, they need to be filled with water (in summer) or a special solution (in winter). In practice, as a rule, road workers do not bother themselves with this. You often see blocks scattered all over the road by the wind.

The Highway Safety regulations, which were approved by the Customs Union Commission, stipulate certain requirements for the use of road signs. Thus, paragraph 13.5 of the Regulations states that signs must be placed in such a way that drivers are warned in advance about all changes in traffic. Road markings must be visible in all weather conditions (except, of course, for snowfall).

The area where work is being carried out begins from the first sign warning about repairs to the sign canceling all restrictions. This is the responsibility of the organization repairing the road.

Rules for installing road signs: regulations

What rules could there be, and how are they regulated? First of all, you should know that there are two so-called sets of rules that the relevant road services are guided by. What vaults are we talking about?

1. Federal Law 196-F3 was adopted on December 10, 1995. The last revision was dated July 26, 2017.
2. GOST 52289-2004. It also mentions that the signs installed must comply with GOST R52290 and R50597.

In general, both codes state that signs must be installed in such a sequence and format that they do not obstruct or disturb traffic participants. Also, they should not be covered with green spaces, pillars, or advertising bills. In other words, road signs should provide ease of use and reduce the likelihood of damage. If for some reason, including weather, the signs cannot be distinguished or require restoration, they are replaced with new ones.

Other hazards

The other hazards road sign warns that there may be some dangers on the road that cannot be described by other warning signs:

If there is a sign on the road for other dangers, the driver should expect anything.

Note. If you come across a car with an other hazards sign on the rear window (not to be confused with the novice driver sign), then you should stay away from it. Such a driver warns others in advance that he does not know the rules of the road.

Installation procedure

Keep in mind that the specific installation plan is also regulated:

1. We study GOSTs, which tell us about the rules and requirements for installation.
2. We measure the distance so that the sign is clearly recognizable at least 100 meters away.
3. We install signs exclusively on the right side of the roadway.
4. If there is a dividing strip on the road, signs are also installed in the middle.

Also, do not forget to obtain permission for installation, attaching, if necessary, a map of the area, including the condition of the side of the road and the road surface, with all the windings.

Cameras are eyes, employees are hands

The center's work is not limited to responding to road accidents. Within the duty shift there are several divisions that are responsible for a wide range of tasks: resolving emergency situations, organizing the operation of traffic lights, monitoring road works.

Is the traffic light blinking yellow or not working at all? As soon as the center receives information about a traffic light failure, a repair request is generated. In parallel with this, the duty shift studies the location of the object and chooses a method of response.

For correct and fast operation, the center interacts with the Highway Patrol service. When going on patrol, the Highway Patrol crew transmits information to the duty shift, where each situation is studied in detail.

The short number 3210 has become an excellent help in the work of the center. Residents call it if they notice irregularities in the operation of traffic lights or the placement of road signs. Thanks to the help of Muscovites, it is possible to quickly solve this or that problem.

Coverage area

Such a zone is the duration of operation of traffic management means on the highway. The requirement to reduce or increase it depends on whether the sign is located in a populated area.

Using example 1 25, in the first case its appearance is expected 50 meters before the work site, then it is duplicated. Also, the number of sign duplicates increases depending on the number of factors obstructing the view, for example, sharp turns. If road work does not take many hours or days, then the sign can only be installed on the site itself

When 1 25 appears, vehicle owners should be careful

In the second case, the zone increases. The minimum is 150 meters, depending on the presence of turns and general traffic statistics on the highway. In special cases, installation of a duplicate is possible even 300 meters before the obstacle.

In addition, special clarifying signs can artificially increase or decrease the zone. Such TSODD may be additional information plates numbered 8 1 1 or 8 1 2 with explanatory numbers. The signs are located under the main sign.

Additional signs

Since sign 1.25 “Road Works” itself carries very little meaning for the driver, it is often supplemented with information signs and other temporary road signs. The most typical among the signs are those that specify the distance to the beginning of the road work site (plate 8.1.1), or the length of this section (plate 8.2.1).

Table 8.1.1 Distance to object. The distance from the sign to the beginning of the dangerous section, the place where the corresponding restriction is introduced, or a certain object (place) located ahead in the direction of travel is indicated.

It is very important to correctly understand their meaning. Sign 8.1.1 does not say anything about the length of the road work area, and sign 8.2.1 in no way means that road work is being carried out immediately beyond the sign.

Separately, it is worth mentioning plate 8.12 “Dangerous roadside”. It also very often complements the “Road Works” sign and informs that it is dangerous to drive onto the side of the road in the sign’s coverage area due to its poor condition. Neglecting the information on this sign can lead to the most serious consequences, including the car falling off a road slope.

Signs 5.16 - 5.18 “Bus (trolleybus), tram and taxi stop”

Signs 5.16 “Bus and (or) trolleybus stopping place”, 5.17 “Tram stopping place” and 5.18 “Taxi parking place” are used to designate stopping points of the corresponding types of route vehicles and passenger taxi parking.

Signs 5.16 “Bus and (or) trolleybus stopping place” are installed at the beginning of the landing area.

If there is a pavilion at a stopping point, then the stop sign can be installed on the pavilion above its closest edge in the direction of travel or on a separate support next to the pavilion.

When it is necessary to indicate the length of one or several stopping points located one after another, sign 5.16 “Bus and (or) trolleybus stopping place” is used with sign 8.2.1 “Validity area”. The sign is installed at the beginning of the first stopping point.

When tram tracks are located in the middle of the roadway (or to the left of a one-way roadway), sign 5.17 “Tram stopping place” is installed to the right of the roadway.

In some cases, when tram tracks are located in the middle of the roadway, the “Tram Stopping Place” sign is duplicated. Duplicate sign 5.17 is installed:

• if there is a raised landing area along the tram tracks - at the beginning of this area;
• on roads with two or more lanes in a given direction, if there is no landing pad - above the left lane.

It must be remembered that stopping or parking is prohibited closer than 15 meters from the stops of route vehicles or the parking of passenger taxis (clause 12.4 of the traffic rules). The starting point is the place where signs 5.16 - 5.18 are installed. This means 15 meters before and 15 meters after these signs, stopping and parking is prohibited.

Stopping is prohibited for any reason (except for stopping to pick up or disembark passengers, provided that this stop does not interfere with the movement of route vehicles or passenger taxis).

In places where route vehicles stop, turning around is still prohibited (clause 8.11 of the traffic rules).

The length of the route vehicle stop and taxi rank can be indicated by marking 1.17 (yellow zigzag). In this case, the prohibition on stopping (parking) and turning around applies throughout the entire yellow marking 1.17.

In populated areas, when driving past designated stops of route vehicles, you must also remember that clause 18.3 of the traffic rules obliges you to give way to trolleybuses and buses starting from the stop.

The issue of priority between route vehicles and other “non-route” traffic participants is discussed in the articles Driving past a stop of route vehicles and Priority of public transport.

Why are such signs needed?

On Russian roads you can often see ongoing repair work. The activities include restoration of the roadway. Moreover, this is carried out both over a large territory and in small areas. Repairs are required due to the deterioration of the road surface.

During this work, a “Road Works” sign must be installed. It warns drivers of danger. Cones and barriers can also be installed. If the entire road is involved in repairs, bypass lanes must be opened. The sign is yellow and orange.

Signs are installed when restoring curbs, removing bushes and other plantings from the road. The structures are required when repairing traffic lights, drawing dividing lines, and eliminating road potholes.

Combinations of characters

Other road signs are often required during road works. Along with the main structure, a sign “Permitted speed is not more than 50 km/h” is needed. It is placed to ensure that drivers on the work site do not increase the designated speed.

It should be remembered that motorists must obey the signs on the road. If this sign is absent, then the speed should be such that it will help to respond in a timely manner to obstacles that appear during repair work. If the "Repair Work" sign is located with the warning: "Caution, gravel release," then this indicates the danger of small stones being released during repairs.

And in combination with the signs “One-way or two-way road”, the sign means that there will be a narrowing of the road ahead due to ongoing repairs. These markings are for the safety of drivers and workers. They must be installed during repairs, otherwise it can lead to accidents.