How to register a constructor car in 2019
According to modern regulations, using specialized services is easy and legal if all parts and components are imported in full compliance with the law.
The designer must be transported across the border legally, with customs clearance procedures carried out. But the surprises begin at the traffic police, where employees do not want to register the car. Argumentation is considered to be a reference to the safety rules for operating vehicles TR. To gain access to registration, you must obtain confirmation of compliance from the Center of Expertise. Specialists must have appropriate accreditation and work with vehicles. If workers give an opinion on suitability for use, then you can submit documents for registration to the authorities
In case of an unreasonable refusal, it is important to go to court and conduct proceedings. To do this, you must receive a written response from the traffic police regarding the refusal.
Some difficulties arise when registering different models of the same brand. For example, for the assembly of a designer kit with documents for a Toyota Corolla, spare parts or a body from a Toyota Spacio are brought - this complicates the registration procedure, since according to the documents the cars are different. This is a common problem. There is no way to register your own designer car in this case. The same question concerns cutting when inspectors identify nuances. And identifying this is not considered difficult, because an illegally imported body is not registered as such (it is registered at customs as scrap metal) and does not go through the customs clearance process. The exception is interchangeable designer bodies. For 2021, there is a list of car models within the same brand, the parts of which can be legally installed and registered with the State Traffic Safety Inspectorate, which expands the possibilities for installing and registering license plate units from different car modifications.
As for the stages of the registration process, they are standardized and are carried out according to the following principle:
Submitting an application through the State Services website or through a direct visit to the traffic police
It is important to note that before carrying out the procedure, the traffic police must evaluate the donor, verify documents and give permission to carry out registration. As noted above, the refusal is issued in writing. Verification of serial numbers of units with documents, which is carried out at a separate site
The presented point is carried out without problems, but requires the provision of documentation that concerns the issues of moving the numbered units of the designer. Next, an application and a package of documents are submitted to the “One Window”, where the forms are filled out. In case of correct actions, the citizen is issued license plates and PTS, which indicate the numbers and features of the vehicle, changes in the body. The final stage is checking for registration errors.
Now you know how to register a constructor car with the traffic police. Time to move on to the main options for moving saw cuts and full-fledged bodies from abroad.
Advantages and disadvantages of the design machine
How to register a designer car and issue a title in 2019.
The benefits of huge savings in customs duties for the buyer of a designer car are obvious.
Among the main advantages of such a car it is worth noting:
- low mileage;
- low price;
- good condition of components;
- relative reliability.
In general, a person gets a reliable and high-quality car at a low price. There are no complaints about the operation of the system, because the parts were not subject to accidents or prolonged downtime.
However, the designer also has a lot of disadvantages, which are rarely taken into account by buyers. Among them:
- problems with car registration;
- unknown build quality;
- selling a car is difficult;
- some car parts may not pass through the border;
- probability of purchasing a cut;
- problems with documents and registration.
It is worth remembering that the purchased car is officially considered a set of parts.
Is it possible to purchase without a title and drive?
If only everything were so simple... All cars from abroad have a title issued by the customs service. We have already said above that cars produced before 2007 are prohibited from being declared, i.e. legally import a car and make customs documents for it. Consequently, such a car will not have a title. And this is one of the main documents for registering a car with the traffic police.
So, you can buy a construction set or cut it, and then assemble a car from it, register it and drive safely?
No. And such options will not work. Without documents for spare parts, you simply do not legalize your equipment: it will not be registered with the traffic police.
Is it possible to make documents in Russia?
No. To register a car, the owner must, among other documents, present a title. And as we wrote above, only customs issues a title for all cars from abroad. Without a title, no one will register a car with the traffic police.
What is a designer for your PTS?
How long does it take to register a car after purchase?
During everyday operation and repairs, the car is periodically subject to disassembly: for example, when installing an alarm system, dry cleaning the interior, repairing after an accident, replacing the engine. Having the proper experience in disassembling and assembling Japanese cars, the quality does not suffer after assembling the kit. What you can see when you accept the car.
Can you send a cut (carpil) of a car to the region without assembly?
Yes we can. In this case, the cut is not assembled; the front and back parts are attached to ties. The cut without assembly will look like this:
For carpil, sending without assembly is possible, but does not make any sense. Pallets with spare parts for carp saws are heavy and take up a lot of space.
And then Russian ingenuity came to the rescue, which more than once helped to get out of a situation that at first glance was a dead end.
Someone in the auto business realized earlier than others that you can buy cars in Japan, disassemble them (separate the engine assembly with automatic transmission, front suspension and attachments from the body, remove the rear suspension and muffler), import and clear them through customs in Russia as separate license plates units. After this, all that remains is to carry out the standard formal procedure for replacing units, as if your engine had broken down or the body had to be replaced.
Legally, replacing an old body with a new one is absolutely legal.
Thus, identification of the vehicle after making changes to its design, in relation to the one registered, is a prerequisite.
If, after replacing the body, it is impossible to identify the vehicle relative to the base one (registered with the State Traffic Inspectorate), the presented vehicle will be a single vehicle, the conformity assessment of which is carried out in accordance with paragraphs 66-75 of the Technical Regulations on the Safety of Wheeled Vehicles, approved by the Decree of the Government of the Russian Federation dated September 10, 2009
Attention
Bringing a car under documents
Due to the fact that customs duties are growing with enviable consistency, in contrast to the income of the population, it has now become popular to purchase cars in Japan and register them with “old” documents left over from cars imported earlier, but no longer in use for one reason or another. reasons. At the same time, you can save from 1000 to 6000 dollars on customs duties. It is enough to buy a disassembled car and documents from a car that is already in the country.
Such an operation in Primorye is called ARRIVING UNDER DOCUMENTS. In this article we will try to expand on this issue a little. First of all, why is this being done?
1.
Constructor and cut: what is the difference
Both options involve importing the vehicle in parts. The most relevant methods are for vehicles older than 5 years, since customs duty rates are increased for them. Each cubic centimeter of a small car engine up to 1 liter costs 3 euros. For a car under 5 years old, this figure is 1.5 euros. If you want a powerful Toyota Sequoia SUV with a 4.7-liter engine or a sporty Ford Mustang with a 5.8-liter engine, you will have to pay 5.7 euros per cubic centimeter. The option of buying a cut-up car or a construction set comes to the rescue. Japan is the exporting country. The main reason for purchasing a used foreign car in this way is the lack of mileage on Russian roads.
What is a construction machine and carpil cutting machine?
Is it possible to sell a car without license plates?
To understand the nuances of registration, it is important to work out the issue of distinguishing concepts. A construction car is a vehicle made from new license plates, assembled using old documents.
This scheme appeared a long time ago, but is still popular. It involves the detailed import of new spare parts and large components (construction parts), which are then formed into a car based on the old one. This technique allows you to avoid paying duties and adjust the price tag without losing quality.
The sequence of actions in this procedure is as follows:
- A construction car is purchased abroad, where craftsmen disassemble the car into parts. Auto mechanics remove the exhaust system, the engine, and for a framed car, the frame. To determine the need to remove a particular unit, read the documentation, where and on what the serial number is applied.
- Crossing the border with the Russian Federation, numbered parts are registered for different recipients and are carried out according to various invoices (invoices will be required to account for the designer). This is the main condition for obtaining the corresponding effect. Duty and customs clearance will be 10-30% of the import of a full car.
- After importing the equipment, an old vehicle is selected, including those that are damaged and cannot be restored. This equipment is re-registered under the documents of imported components. The result is the effect of transforming an old, broken car with new license plate units.
But the procedure is accompanied by flaws, and the first of them is the question of how to properly register a constructor? This is done with a number of problems. According to the documents, we will receive an old, damaged car, but in fact a brand new vehicle, which the state strictly suppresses. The savings in this case for the end consumer are up to 50%, and the budget loss is even greater. Therefore, registration is sometimes problematic for various reasons.
The cut deserves special consideration. This is the same designer, but with minor adjustments, which are associated with the element-by-element import of the frame. It is divided in half to avoid paying the full duty. In this case, a title is not issued for the designer vehicle, registration is impossible, since the design of the vehicle is considered unsafe for participation in road traffic.
How to identify a constructor machine
Often, a cut or construction kit is supplied under the guise of normal cars.
It is important to understand that the user may have problems not only with documents for such transport, but also with its technical condition
It is issued as if the number plates on an old car had been replaced.
Naturally, changes in the design of the vehicle must be registered with the traffic police, which can be done if you have documents for these components. More information about replacing and registering changes in the design of a vehicle can be found by going to the article “Changes in the design of a vehicle subject to registration.”
According to the documents, you will still have the same old or broken car with replaced units, but in reality you will be driving a new car. Even when taking into account the costs of buying an old or wrecked car with documents, the net savings are rarely below 50%.
How to determine
In order not to buy a cut, we recommend:
purchase a thickness gauge. Before painting, the weld seam is masked with putty, which you can easily identify. Be sure to take measurements at typical cut locations; remove the door seals. Unscrew or remove, if the owner allows, the plastic lining of the interior
You can even identify the seam with the naked eye; pay attention to the shade of paint, shagreen. After assembly, such cars are most often painted using the transfer method.
When choosing a used car, do not ignore the information on identifying damaged cars and overturned ones. These tips will definitely help you determine the cut.
https://youtube.com/watch?v=sw3CnbYA2CI
Designer for your PTS what is 2018
Unfortunately, they promise to close this nice feature soon.
You can use documents from stolen cars that were left in the hands of the unfortunate owners, as opposed to the car. In this case, serious connections with the traffic police are required in order to remove this car from the theft database, otherwise nothing will come of it.
If you need to perform all operations on behalf of the owner of the car, stock up on a sufficient number of copies of notarized powers of attorney, which indicate that you have the right to carry out such actions.
You can buy a construction set that has already been assembled and cleared through customs, while you save time and effort, but you gain less in money.
Saving.
On a 91 NISSAN SAFARI jeep with a 4200cc engine, you can save about 6,000 euros.
Is it possible to drive a construction car?
Since it is quite possible to check the car for cutting, the next question arises - is it safe to drive and how long will it be used without any problems.
From the editor: Kia Rio 2021 comfort package, what is included: we outline the essence
If, for example, you are selling a frame jeep, in which the body is well and professionally welded, you can take a risk and purchase such a car
Just pay special attention to the documents - in order for registration with the traffic police to go smoothly, you need to have a technical passport (PTS) from the donor car in hand
Riding such a jeep is quite safe, since in the event of any accident, the main load from the impact is taken by the frame, which no one sawed.
Another thing is frameless cars. The first trouble is that clearing such a car through customs is much more problematic (you need to replace the numbers on the body) and riskier (you need good documents), otherwise the traffic police may simply refuse to clear it.
In addition, driving such cars is dangerous. Often, in the event of a traffic accident, they are simply torn in half. It is clear that the fate of passengers in such a situation is deplorable.
Therefore, think carefully about whether it is worth getting involved with a cutting machine. If you want to protect yourself from buying a designer car under the guise of being untouched, then be extremely careful, or better yet, turn to professionals.
As a Lego construction set, you can save about 200 thousand rubles in import duties. In addition, these cars can be tens of times cheaper than their new counterparts. That is why the question arises, what is a cutting machine? There are two options for selling inexpensive cars: a kit is assembled from several different cars or, in fact, a replacement of units is issued and that’s it. Other parts may even be collected from other cars, even after an accident.
In contrast, cutting machines cut in half or cut off certain parts in order to avoid paying high duties at customs during import into the country. In this case, duty is paid either for scrap metal or for spare parts. But it is still several orders of magnitude cheaper.
This business is quite widespread, for example, sawing machines from Japan make up a significant part of the total supply and reached 2 thousand tons last year. But it should be taken into account that such options are the most dangerous. Below we will look at how you can win and where the catch lies.
Designer for your PTS what does this mean
Also, documents with a frame or with an iron (bar) can be purchased on the Internet.
Why is it not profitable to buy a car from an “honest designer”, as before?
Firstly, at the moment it is very difficult and expensive to register an “honest designer”. Previously, it was much simpler, so there was a point in bringing it in like this. Secondly, previously, designers of the 1st configuration were not subject to a high duty of 3,000 euros per body, as is now the case. When importing by sawing or carving, no duty is paid for the body of the 1st configuration.
Why is it not profitable to buy a car with the front half?
Because the cost of delivery and customs clearance of halves from Japan is not much less than for cutting. But when you order a cut, you will also have the entire rear part of the car.
What machines are profitable to buy from Japan by sawing (cutting)?
In principle, any.
